One of the hardest substances that can get stuck on the surface of your car is tree sap. If it is not taken care of, it can ruin your paint and leave a blotch mark while also destroying the clear coat of the vehicle. In order to preserve the look of your vehicle and keep it in a good condition, it is important to get rid of the sap. By Astonishing Detail, this article will show you the proper way on how to remove tree sap from your car. Come along as we go through the procedure to get the car looking brand new!
Why Removing Tree Sap is Important
To start with, tree sap is highly sticky because in its nature, it is also an acid. Thus, if it is kept on the paint for an extended time, it will start corroding the paint of your car and thus giving it a permanent discoloration. Therefore, by removing the sap from the paint as soon as you can, you will be setting a worthwhile barrier and a chance to not ruin the paint on your car.
Materials You’ll Need
So, you’re looking to remove tree sap from a car, and since you want to do that safely, consider these materials:
- Cleaning Towels: microfiber cloths would be the best for this sort of work.
- Strong Alcohol: Isopropyl alcohol can actually work. If it doesn’t, consider using Chemical products which are commercialized and are specialized for tree sap.
- Warm Water And Soap: You could mix it with mild car wash soap if you’re dedicated to cleaning.
- A Spray Bottle: This would come in handy while cleaning, since it’s easy to get water into those hard to reach places.
- Waxes And Sealants: These come in handy to protect your car after cleaning it.
All of these items allow proper removal of sap without damaging your paint on the car.
Steps to Remove Tree Sap from Your Car
Step 1: Remove any dirt or debris with soap and water.
First, start by scrubbing the affected area well. This scraping away of dirt, surface grease, or any grit renders working on the completer sap with paint less difficult because particles are no longer present.
- Start with gently rinsing the affected area of any attach debris using a mixture of water and a little mild car wash soap placed in a spray bottle or a bucket.
- Ensure that you carry around the foam to the area where the target vase is located to guarantee its safety from dust, debris and other unwanted substances, and that it is spongy enough.
- After cleaning, soap up then refrain from rubbing the area and pat it dry instead with a new paint-free micro fiber cloth. Congrats as you now have finished Step 1. Your work is now ready for the next process which is sap removal.
Step 2: Use Isopropyl Alcohol and or Sap Remover
- Soaking the Cloth: Soak a small area of a microfiber cloth with isopropyl alcohol or your favorite tree sap remover. Make sure to use a small amount and deep clean the cloth to avoid soaking it.
- Let it Soak for a Moment: Apply the cloth to the sticky area and allow the cloth to stay there for 30 seconds. It will aid in loosening the pin or sticky area.
- Gently Rub in Small Circles: Using small gentle circles, begin to work the cloth and rub over the sticky area or the sap. Make sure not to apply too much pressure while rubbing, eagerness does not always help when it comes to this method.
- Repeat if Needed: For stubborn sticky areas, go back to the earlier steps until the area is completely free from stickiness.
Step 3: Clean and Rinse the Area Once More
After sap has been removed from the area, the last step is to clean the area for a second time. This will remove any traces of alcohol or the sap remover that would have been left on the surface after the first washing.
- Wash: Clean the affected area using your favorite car wash soap and water.
- Rinse and Dry: Rinse the area until all the soap is gone and wipe it dry using a clean microfiber cloth.
Step 4: Safeguarding the Area with Wax or Sealant
Now that the sap has been scrubbed clean, it would be a wise idea to cover the area with some protection to avoid further damage.
- Application of Wax or Sealant: Grab a clean microfiber cloth and rub the car with a thin and smooth layer of wax or paint sealant.
- Buffing: Once done applying the wax or sealant, buff it in circular motions which would shine it up and provide a nice finish to the area.
Tips For Avoidance Of Tree Sap Buildup
Avoid Evergreen Parking: If at all possible, do not park your car beneath trees, more so in the months when sap flow is heavy, when it is not necessary to do so.
- Washing Thy Car: Car washes done often will assist in removal of contaminants such before they get the chance to settle on to your paint.
- Use Thy Shield Of Car Cover: If necessary, to park under trees, use a car cover to safeguard the paint.
When to Consult an Expert if the Situation Gets Worse
If the tree sap is still on the surface or if you fear scratching your car’s surface while attempting to clean it, it is prudent to call for assistance. That’s where Astonishing Detail steps in; its products contain all the necessary chemicals and elements for the safe removal of sap without affecting the appearance of the car. Do not put yourself at a risk of causing damage – have them take care of it.
Call Astonishing Detail to Remove Sap from your Car through Formidable Experts
Pine pitch removal is not for the faint-hearted as it involves high precision work. Should you choose not to do it, or should you decide to have it done by an expert then I suggest calling Astonishing Detail. Our staff members based in Henrico, Virginia are professionals who serve your needs with all the required detail to make your car seem new.
How Can I Get in Touch with Astonishing Detail?
Website: www.astonishingdetail.com
Address: 2501 Grenoble Road, Henrico, Virginia 23294
Phone: +1 804-288-1515
Email: [email protected]
Recent Comments